Description

Do you feel like your hearing aid is never quite clean enough? Is your cleaning routine taking time out of your day? The PerfectClean Hearing Aid Cleaning System has been designed to clean, disinfect and dry your hearing aids with the touch of a button!

Using transformative technology; the air-drying system, antibacterial cleaning solution, and UV-C lamp, PerfectClean will purify and sanitize your hearing aid in just 90 minutes.

Aided by Vortex Power, the cleaning system uses an antibacterial refill solution to disinfect the domes, wax guards, and remove built-up earwax. It has three unique processes to ensure that your hearing aids are clean, dry, and ready for your next use:

• The cleaning process is a 20-minute cycle. The system uses the antibacterial refill solution to sanitize and remove ear wax from the hearing aid. Substitute cleaning solutions must never be used.
• The drying process is a 65-minute cycle. The hearing aid is then dried by the air-drying system. The temperature is maintained at 45 degrees to ensure no damage to your hearing aids.
• The disinfecting process is a 5-minute cycle. The UV-C lamp is used to sanitize all areas of your hearing aid and eliminates over 99% of bacteria. Do not look at the UV-C lamp when in use.

A complete cleaning cycle is 90 minutes and the system will automatically switch off when the cycle is complete.  It is recommended to use the PerfectClean Hearing Aid Cleaning System every day.

How to use:

To use the device, plug it in using the mains plug provided. A blue indicator light will turn on to show that the system is powered. After 30 seconds of no use, the blue light will turn off.

Before first use, fill the PerfectClean system to the top using the antibacterial cleaning solution cartridge. To do so, remove the refill tab and push the refill down until all caps are pierced and the solution is empty.

Place your hearing aids in the spaces provided and close the cover on the device. Batteries can remain in the hearing aids for the cleaning process. Press the button and a pink light will turn on to indicate the start of the process. This light will turn blue once the cleaning process has commenced.

To clean the filter, place the PerfectClean on its front side to prevent any fluid from leaking and rotate the cap to the unlocked position. Clean the filter with warm water and then replace the cap with the locked position. Do not use any other products to clean the device. Gently dry the device with a soft cloth.

*This device is not suitable for rechargeable hearing aids. *